Problem
Gasket coming out of
lid liner.
Lid spindle will not
turn or turns hard
with lid open.
10
Cause
Crumbs under gasket.
Spindle dry.
Worn acme nut.
Correction
•
Remove gasket and clean per
2.16 Pressure Regulation/
Exhaust , page
44.
•
Clean top rim of vat (frypot).
•
Replace worn or damaged
gasket per
2.16 Pressure
Regulation/Exhaust , page
2.16 Pressure
Lubricate spindle per
Regulation/Exhaust , page
Replace acme nut per
2.16 Pressure
Regulation/Exhaust , page
44.
44.
44.