Table of Contents
Advertisement
Product description
4.4 Menu navigation
4.4
Menu navigation
The following section describes the front-mounted LCD. This display enables the device to
be parameterized (see chapter Parameterization (Page 155)).
In addition, measured values relating to voltage and frequency can be read from it.
4.5
Description of the main menu
Procedure for opening the main menu
● Press the ✓ key to open the main menu
Note
Start navigating through the main menu
In order to open the main menu, you must be on the display pages screen. For example, to
start the main menu from the SETUP, you must first exit the SETUP menu by pressing the
OFF key.
Note
Password protection
Access to some menu items can be restricted by setting a password (see chapter Password
protection (Page 52)). The unavailable symbols are grayed out. In addition, the message
ACCESS LOCKED indicates that the menu cannot be selected. In its factory setting, the
ATC contains a stored password. Therefore, these menu options can only be accessed after
entering a password.
36
3KC ATC6500 transfer control device
Manual, 05/2019, L1V30538268002A-01
Advertisement
Table of Contents
