Table of Contents
Advertisement
Parameterization
The ATC6500 can be parameterized in various ways:
● Via the user interface
● Via the powerconfig software (Version 3.12 or higher)
9.1
Parameterization via the user interface
Using the Setup menu, the device can be parameterized on site on the ATC6500.
1. Make sure that the ATC is in the OFF mode
2. Then open the main menu, as described in chapter Description of main menu (Page 36).
3. Enter the password (see chapter Password protection (Page 52)).
4. Select the Settings menu symbol.
On selecting the Settings menu, the following window opens:
This contains submenus listing all parameters according to function-related criteria.
5. Select the required menu with the ▲ or ▼ keys and confirm with ✓.
6. To exit the setting and return to the display of measurements, press OFF.
3KC ATC6500 transfer control device
Manual, 05/2019, L1V30538268002A-01
9
155
Advertisement
Table of Contents
