Table of Contents
Advertisement
Connection
7.1 Connection of the power supply for the ATC6500
Use of the DC source without additional voltage taps
The schematic diagram below shows how a DC source can be used to implement the
continuous power supply to the ATC6500:
When using a DC source, the ATC6500 does not switch off during a transfer. In this case,
the capacitance of the DC source must be selected accordingly. Please note the additionally
necessary fuse protection for the inputs of the DC supply (see chapter Technical
specifications (Page 237)).
86
3KC ATC6500 transfer control device
Manual, 05/2019, L1V30538268002A-01
Advertisement
Table of Contents
