Siemens SENTRON ATC6500 Manual page 158

Parameterization
9.1 Parameterization via the user interface
The following submenus are available in the Settings menu:
Code Designation
P01 SETTINGS
P02 GENERAL
P03 PASSWORD
P04 BATTERY
P05 ACOUSTIC ALARMS
P06 SOURCE LINES
P07 BREAKERS
P08 SWITCH
P09 SOURCE LINE CHK
P10 COMMUNICATIONS
P11 AUTOMATIC TEST
P12 DIGITAL INPUTS
P13 DIGITAL OUTPUTS
P14 MISCELLANEOUS
P15 LIMIT THRESHOLDS
P16 COUNTERS
P17 TIMER
P21 USER ALARMS
P22 ALARM TABLE
Example of P04 Battery submenu
The submenus list all parameters with their code, description and actual setting
The example below shows the P04 Battery submenu:
①
②
③
④
156
Description
Language, brightness, display pages etc.
Key system data
Setting of the access code
Parameter for the DC source
Setting for the internal sounds and for the external sirens
Setting regarding the supply sources
Setting regarding the breakers
Basic settings regarding load transfer
Limit thresholds for the sources
Communication parameters
Period, duration, mode of automatic test
Programmable functions of the digital inputs
Programmable functions of the digital outputs
Functions such as maintenance etc.
Programmable limit thresholds LIMx
Programmable generic counters
Programmable generic timers
Programmable alarms
Enabling and effect of alarms
Present setting value
Currently selected parameter
Parameter description
Parameter code
3KC ATC6500 transfer control device
Manual, 05/2019, L1V30538268002A-01