Transition To Shipping State (Function Code 03) - Brother HLL3290CDW Service Manual

1.3.2

Transition to shipping state (Function code 03)

This function contains display soft switch Check SUM, change ON/OFF setting of special
function at start up and transfer to the shipping state. Display soft switch Check SUM is
function for sales correspondence or production process and not used for the service. Only
change ON/OFF setting of special function at start up and transfer to the shipping state can
used for the service.
■
Display soft switch Check SUM
< Function >
This function is to display soft switch check SUM such as FSW/USW/WSW etc. Only for soft
switch display and not used for the service.
This function is displayed on LCD after enter function code 03 as "1.SWSUM?".
■
Change ON/OFF setting of special function at start up
< Function >
When this parameter is [FUNC_DISABLE], perform switching the shipping state from OFF to
■
ON (" Transfer to the shipping
shipping state cannot be switched to ON. Originally, during product manufacturing, this
function switches whether to enable or disable the menu function displayed by the special
function at start up, and it is invalid ([FUNC_DISABLE]) when the users use the machine.
< Operating Procedure >
(1) For models with touch panel
Press the [0], and then the [3] in the initial state of maintenance mode. "1.SWSUM?" is
displayed on the LCD.
For models without touch panel
Press the [▲] or [▼] in the initial state of maintenance mode to display
"MAINTENANCE 03" on the LCD, and press the [OK]. "1.SWSUM?" is displayed on the
LCD.
(2) Press the [▲] or [▼] to select "2.PowerOnFunc ?" and then press the [Start] or [Mono
Start]. "FUNC_ENABLE" or "FUNC_DISABLE" is displayed on the LCD.
(3) If "FUNC_DISABLE" appears on the LCD, the machine's state is switchable to the factory
shipping state. Press the [X] or [Stop] to return the machine to the initial state of
maintenance mode.
If "FUNC_ENABLE" appears on the LCD, press the [▲] or [▼] to select
"FUNC_DISABLE", and press the [SET] or [OK].
The setting is written into the machine, and the machine returns to the initial screen of the
function code 03.
state"). When this parameter is [FUNC_ENABLE], the
5-5
Confidential