Connection Via Connecting Lead - KaVo EXTRAmatic 9040 Operating Instructions Manual

Operating Instruction EXTRAmatic 9040
|
4 Start-up 4.2 Connector

4.2.6 Connection via connecting lead

Note
It is essential that the electrical connection and extraction hose connection are
assigned to each other (see mark).
The total connected load must not exceed 1900 Watt, but may be distributed over
3 sockets.
If the unit is connected without a control line, a connecting cable is required between
the controller and extractor unit.
▶ Insert connecting lead ③ into socket ④ on the extractor unit.
▶ Insert the country-specific mains plug ① into socket ② of connecting lead ③.
1
2
3
4
30/62