Operating Instruction EXTRAmatic 9040
6 Preparation methods
|
6.2 Maintenance
Replace filter ③ if it becomes damaged or following a number of failed attempts to
clean it
1
7
8
Note
Original "KaVo filter cartridges" must be used in order to guarantee full operability
and safety of this unit.
Suitable protective clothing (mask, gloves etc) must be worn.
In the event of partial filter wear and tear, which is caused by long-term use and can
no longer be remedied by frequent cleaning, the filter ③ including strip ⑧ must be
replaced.
Disassembly
▶ Remove the front panel ⑥ and the dust container.
▶ Remove hex head screw M5 x 14 and remove safety angle bracket.
▶ Remove filter box cover② .
2
3
4
5
6
54/62