KaVo EXTRAmatic 9040 Operating Instructions Manual page 40

Operating Instruction EXTRAmatic 9040
|
5 Operation 5.3 Utility programs
Workstation
▶ Using the up or down button, select the required workstation (AP1, AP2 or AP3)
and choose ENTER.
▶ Using the up or down button, select Extraction level and choose ENTER.
Extraction level
▶ Using the up or down button, select the required extraction level (24, 36, 48 or
72 units) and choose ENTER to store the extraction level.
Factory setting: 24 units
Optimum operating mode
▶ Using the up or down button, select Optimum operating mode and choose EN‐
TER.
▶ Using the up or down button, select "yes" or "no".
Choosing Optimum operating mode "yes" means that this workstation shall always
receive the extraction level configured. If insufficient extraction power is available,
other workstations will be locked.
Choosing Optimum operating mode "no" means that this workstation shall receive
the extraction level configured if this amount of power is available. The other work‐
stations will not be locked and the extraction level may drop below that configured.
Factory setting: Optimum: No.
Identification
▶ Using the up or down button, select Identification mode and choose ENTER.
▶ Using the up or down button, select Current, Control input or Continuous and
choose ENTER.
"Current" identification
This workstation is started up by connecting to the mains.
38/62