Connecting At The Dental Laboratory; Connecting The Extraction Hoses - KaVo EXTRAmatic 9040 Operating Instructions Manual

Operating Instruction EXTRAmatic 9040
|
4 Start-up 4.2 Connector

4.2.2 Connecting at the dental laboratory

If the unit is to be used in a dental laboratory in combination with a KaVo workstation,
position the unit beneath or adjacent to the workstation.

4.2.3 Connecting the extraction hoses

Note
If the extractor unit has recessed extraction openings, ensure that the hose is the
optimum length, that it is not bent or under tension and that it glides smoothly on
the hose runner.
When fitting hoses for use in KaVo laboratory workstations or at KaVo extractor units
or support racks ①, choose those with a diameter of 42 mm.
A B S O R m a t i c R
A B S O R m a t i c R
o 42 mm
1
26/62