Duration To Cut-Out" Utility Program (2600); Memory Time" Utility Program (2650) - KaVo EXTRAmatic 9040 Operating Instructions Manual

Operating Instruction EXTRAmatic 9040
|
5 Operation 5.3 Utility programs
▶ Using the up or down button, select "yes" or "no".
If you select "no" for filter time reset, the expired time remains unchanged.
If you select "yes" for filter time reset, the expired time is reset to zero.
▶ Press ENTER.
This saves the new value that has been set.
Choosing "no" will cause you to exit the utility program.
Choosing "yes" will complete the procedure.
▶ Press the back button
This takes you out of the utility program.

5.3.14 "Duration to cut-out" utility program (2600)

▶ Using the the up or down button, select the "Duration to cut-out" utility program
and choose ENTER.
▶ Using the up or down button, set the time you would like extraction to continue
running after completion until it cuts out (between 3 and 20 seconds).
▶ Press ENTER.
This saves the new value that has been set.
Factory setting: 3 seconds

5.3.15 "Memory time" utility program (2650)

▶ Using the the up or down button, select the "Memory time" utility program and
choose ENTER.
▶ Using the up or down button, select the memory time setting you require.
46/62