Extraction Level Preselection - KaVo EXTRAmatic 9040 Operating Instructions Manual

Operating Instruction EXTRAmatic 9040
|
5 Operation 5.2 User programs
Connected "external" operating panels only have access to the extraction channel
that has been specifically allocated to them. The settings for "all" connected extrac‐
tion channels and devices can be configured on the EXTRAmatic main display.
EXTRAmatic

5.2.4 Extraction level preselection

There are four extraction levels to choose from. You use this button to manually
select the one you require (an LED shows which level is selected).
It is possible to pre-programme the extraction level at each extraction point via in‐
dividual configuration (see User program).
It is possible to preset a temporary increase in the extraction level here.
If this temporary period is too short, a high memory time must be set.
36/62