KaVo EXTRAmatic 9040 Operating Instructions Manual page 58

Operating Instruction EXTRAmatic 9040
6 Preparation methods
|
6.2 Maintenance
▶ Lift defective or damaged filters③ at front and remove them
▶ Screw off used brush strip⑧ and affix new brush strip Mat. no. .022.93005 using
three knurled nuts⑦ .
▶ Place used filters ③ and brush strip⑧ in PE waste bag (accessories - disposal
setMat. no. 0.657.0951) and dispose.
1
7
8
Installation
▶ Carefully insert new filters③ Mat. no. .065.71142 and centre them in the rear
filter flange.
▶ Slightly lift filter③ at the front and affix the filter with front filter flange④ by
screwing on clamping nut⑤ . Follow the reverse sequence for additional instal‐
lation.
See also:
6.2.1 Installation, Page 50
2
3
4
5
6
56/62