Operating Instruction EXTRAmatic 9040
|
5 Operation
5.3 Utility programs
5.3.8 "Manual sensitivity adjustment" utility program (2350)
▶ Using the the up or down button, select the "Manual sensitivity adjustment" utility
program and choose ENTER.
▶ Using the up or down button, select the required workstation (AP1, AP2 or AP3).
▶ Press ENTER.
▶ Using the up or down button, change the set value.
▶ Press ENTER.
This saves the new value that has been set.
Factory setting:
80 (230 V)
260 (100 V)
200 (120 V)
▶ Press the back button
This takes you out of the utility program.
5.3.9 "Display of the socket current" utility programm (2400)
▶ Using the the up or down button, select the "Socket current" utility program and
choose ENTER.
▶ Using the up or down button, select the required workstation (AP1, AP2 or AP3).
▶ Press ENTER.
This displays the present measured current status at the selected workstation.
This value does not have a unit.
It is identical to the values in the "Automatic sensitivity adjustment" and "Manual
sensitivity adjustment" utility programs.
▶ Press the back button
This takes you out of the utility program.
44/62