Connector; Connecting At The Workplace - KaVo EXTRAmatic 9040 Operating Instructions Manual

Operating Instruction EXTRAmatic 9040
|
4 Start-up

4.2 Connector

4.2 Connector
Note
Make sure that the control line with display, extraction hose connection and socket
for the item generating dust are positioned and aligned correctly.

4.2.1 Connecting at the workplace

▶ Set up the unit in its intended location.
▶ On the rear of the unit, remove the cover that was protecting the electronic
connections in transit.
At the workplace, push the unit into position; do not screw it to the bench top or
adjacent objects.
The unit is clamped on to the worktop using levelling screws.
See also: 4.2.4 Levelling, Page 28
If the extractor unit is beneath a work bench, the height of the unit will need to be
adjusted.
▶ Remove the rear panel from the adjacent cabinet element on the left or right.
24/62