Connecting The Surgical Motor; Connecting The Coolant Container And Hose Set - KaVo MASTERsurg LUX Wireless Instructions For Use Manual

Instructions for use MASTERsurg LUX Wireless REF 1.009.1200
4 Commissioning | 4.4 Connecting the surgical motor

4.4 Connecting the surgical motor

Note
The delivered parts are not sterile (except for the coolant hose). Before the first
treatment of a patient, the surgical motor, motor cable, and the handpiece tray need
to be reprocessed.
See also:
2 7 Reprocessing steps in accordance with DIN EN ISO 17664, Page 58
① Motor coupling
③ Handpiece tray
▶ Plug the surgical motor ② into the motor coupling ① and secure it with a union
nut. Please note the separate instructions for use of the motor.
▶ Place the surgical motor on the handpiece tray ③.
▶ Insert the plug of the motor cable ④ into the connector on the device, align the
marker points, and insert the plug until it snaps into place.

4.5 Connecting the coolant container and hose set

Running, open hose pump.
Risk of injury.
▶ Turn off the device before opening the hose pump.
4
② Surgical motor
④ Plug of motor cable
CAUTION
24 / 76
3 2 1