Leds - KaVo EXTRAmatic 9040 Operating Instructions Manual

Operating Instruction EXTRAmatic 9040
6 Preparation methods
|
6.2 Maintenance
Switch off power switch ① and wait approximately 10 seconds. Start again and the
unit returns to normal operating mode.
1
7
8

6.2.4 LEDs

"Filter" LED - always on
See also:
7 Troubleshooting, Page 59
Warning 30.
If LED ① is constantly lit, this indicates that the filter is full.
The next time the extractor motor is switched off, the filter is subjected to an auto‐
matic clean for approx. 60 seconds.
This indicator is also a sign to the user that they should temporarily turn off the
connected tool.
EXTRAmatic
2
3
4
5
6
1 2 3
4
57/62