Replacing The Active Carbon Filter - KaVo EXTRAmatic 9040 Operating Instructions Manual

Operating Instruction EXTRAmatic 9040
6 Preparation methods
|
6.2 Maintenance

6.2.2 Replacing the active carbon filter

Disassembly
▶ Remove the dust container ①.
Further disassembly.
See also: 6.2.1 Disassembly, Page 49
▶ Fold up the two quick locks② on the cover ③ above the noise insulation inserts
or plug-in units for the active charcoal filter and remove cover.
1
▶ Remove the two sound insulation inserts④ or used active charcoal filter
blocks⑤ Mat. no. .065.71152 (monitoring and length of use (settable according
to the utility program "Charcoal Filter Monitoring" and "Charcoal Filter Exchange
Schedule).
See also:
5.3.10 "Active carbon filter control" utility program (2500), Page 45
5.3.11 "Time to change active carbon filter" utility program (2450), Page 45
Installation
▶ insert new active charcoal filter blocks⑤ (Mat. no. .065.71152) so that the seal
faces outward.
2
3
52/62