NBase-Xyplex MAXserver 1608A Getting Started page 98

This section describes how to define the image filename if you selected
CARD, XMOP or MOP as the loading method. Once you have selected the
dumping methods and pressed RETURN, the unit displays the following
prompt (if you selected CARD, XMOP or MOP as the unit's loading method).
CARD/XMOP/MOP IMAGE FILENAME (16 CHARACTERS MAX)
[XPCSRV20]:
1. Enter a file name or a numerical value. The valid responses are as
follows:
Valid filenames
Valid filenames consist of up to 16 characters, which can be letters and
numbers, the underscore character (_), the hyphen character (-), and the
period (.) character. The default load file name is XPCSRV20. (The actual
name of the load file is XPCSRV20.SYS.)
Numerical Values
In place of a filename, you can specify a numerical value. A numerical value
specifies to a Xyplex loader (another unit which has a flash card and the
proper load image, or a MAXserver Manager card) that it should determine
the appropriate load file based on:
·
The requesting unit's hardware type, or
·
A node entry in the client database of a Xyplex loader.
You can also use numerical values to specify that a MOP (Maintenance
Operations Protocol) loader is to determine the appropriate load file based
on information contained in the NCP (Network Control Program) database.
98
Getting Started with MAXserver Access Servers
0038