Autobauding Feature - NBase-Xyplex MAXserver 1608A Getting Started

Configuration
Initialization Record 1
Initialization Record 2
Initialization Record 3
Parameter file load method
Software Image load method*
Dump File Method
Software filename for
CARD/XMOP/MOP loading
Default unit IP address:
Installed memory
Loading Status messages
Directed TFTP values
Server login password (#)
Privileged password
* DTFTP is not enabled at the factory.

Autobauding Feature

MAXserver serial ports are configured to adjust automatically to the
communication speed of a connected terminal.
0038
Getting Started with MAXserver Access Servers
Table 1 - Factory Default Settings
Enabled
Disabled
Disabled
NVS, XMOP, MOP, BOOTP, RARP
CARD, XMOP, MOP, BOOTP, RARP,
DTFTP*
XMOP, MOP, BOOTP, RARP
XPCSRV20
0.0.0.0
4 MB
Enabled
0.0.0.0 or N/A
ACCESS
SYSTEM
Factory Default Setting
31