About The Configuration Menu; Display Configuration; Figure 28 - Access Server Configuration Menu - NBase-Xyplex MAXserver 1608A Getting Started

RETURN. The unit displays the menu shown in Figure 28.
Welcome to the Configuration Menu.
Access server Configuration Menu
1. Display unit configuration
2. Modify unit configuration
3. Initialize server and port parameters
4. Revert to stored configuration
S. Exit saving configuration changes
X. Exit without saving configuration changes
Enter menu selection [X]:

About the Configuration Menu

At the "Enter menu selection" prompt of the Access Server Configuration
Menu, type the number corresponding to the configuration action you want
to perform, then press RETURN. (The default choice is X -- exit without
saving configuration changes.) The sections that follow describe each option
in detail.
After you exit from the Configuration Menu, the unit loads software and
parameters.
For each prompt shown in the Configuration Menu, the default choice is
shown in square brackets, [ ]. For example, [A] indicates that "A" is the
default choice for a prompt. Press RETURN to select the default choice.

Display Configuration

The Display Configuration option lets you view a list of the current
configuration values and the new values that will be used after you exit from
the menu and save the changes.
84
Getting Started with MAXserver Access Servers

Figure 28 - Access Server Configuration Menu

0038