Connecting The Ethernet Interface; Figure 4 - Maxserver 1620/1640, Rear View - NBase-Xyplex MAXserver 1608A Getting Started

Connecting the Ethernet Interface

Connect either a 10Base-T or AUI Ethernet network cable to the appropriate
connector on the rear of the MAXserver (See Figure 4 for 20-port and 40-port
models; Figure 5 for 8-port and 4-port models.) Connect only one Ethernet
cable to the unit. When powered up, the unit selects the interface on which
it detects network activity.
MAXserver 1620 Terminal Server
110 - 240 VAC ~
1.0 - 0,5A 50 - 60 Hz
1
MAXserver 1640 Terminal Server
110 - 240 VAC ~
1.0 - 0,5A 50 - 60 Hz
24
Getting Started with MAXserver Access Servers
2 3 4 5 6 7 8 9 10 11 12
RJ-45 Serial Port Connectors.
RJ-45 Serial Port Connectors.
Top Row: Ports 1 through 20
Bottom Row: Ports 21 through 40.

Figure 4 - MAXserver 1620/1640, Rear View

13 14 15 16 17 18 19 20
10BASE-T Ethernet
RJ-45 Connector
Link LED
10BASE-T Ethernet
RJ-45 Connector
Link LED
ETHERNET
Standard Ethernet
(AUI) Connector
ETHERNET
Standard Ethernet
(AUI) Connector
0038