Troubleshooting; Startup/Loading Problems - NBase-Xyplex MAXserver 1608A Getting Started

Troubleshooting

Refer to this section if you experience a problem with your MAXserver. This
section describes:
·
How to troubleshoot startup and loading problems
·
What to do if the LAN light on the front panel goes out
·
How to reset the MAXserver

Startup/Loading Problems

Refer to this section if you have powered up the MAXserver or re-initialized
the unit and the front panel lights do not behave as follows after several
minutes:
·
RUN light flashes slowly
·
LAN light flashes as Ethernet packets are received
Normally, the light pattern appears as follows when you power up the
MAXserver, or re-initialize the unit:
9. All lights ON for approximately one second. (The MAXserver is testing
the lights.)
10. Each port light goes ON in order – left most to right most. (The
MAXserver is running a self test.)
11. The RUN light flashes rapidly. (The self test has completed.)
12. The LAN light goes ON. (The MAXserver is starting the software
loading process.)
128
Getting Started with MAXserver Access Servers
0038