Loading And Dumping Protocols; Displaying The Software Load Host; Displaying The Parameter Server - NBase-Xyplex MAXserver 1608A Getting Started

Loading and Dumping Protocols

Each initialization record has several loading and dumping protocols
enabled by default if the access server attempts to obtain software and
parameters from the network.The enabled protocols determine where the
access server obtains the files. Table 4 lists the enabled protocols.
Enabled Protocol
XMOP
MOP
RARP, BOOTP, DTFTP

Displaying the Software Load Host

Use the SHOW/MONITOR SERVER STATUS command to display the name
and location of the software load host if the access server obtained the
software load image from the network.

Displaying the Parameter Server

Use the SHOW/LIST/ MONITOR PARAMETER SERVER command to
display the name and location of the parameter server.
By default, all available dump protocols and parameter file protocols are
enabled, and all available software load image protocols are enabled except
DTFTP. Table 5 lists the available protocols for each process.
88
Getting Started with MAXserver Access Servers
Table 4 - Enabled Protocols
Files Obtained From Host/Loader
Xyplex loader
VAX/VMS host
UNIX host
0038