Figure 33 - Sample Primary Initialization Record Display - NBase-Xyplex MAXserver 1608A Getting Started

Figure 33 shows a sample display.
Primary Record:
Internet Load Address
Internet Load Host
Internet Load Gateway
Internet Load File
Software:
Image Load Protocols Enabled: Card, XMOP, MOP, BOOTP, RARP
Dump Protocols Enabled:
Parameter Protocols Enabled:

Figure 33 - Sample Primary Initialization Record Display

Field
Primary Record
Internet Load
Address
Internet Load
Gateway
Internet Load File
Software
Image Load
Protocols Enabled
Dump Protocols
Enabled
Parameter Protocols
Enabled
108
Getting Started with MAXserver Access Servers
Enabled
0.0.0.0
0.0.0.0
0.0.0.0
None
XPCSRV20
XMOP, MOP, BOOTP, RARP
NVS, XMOP, MOP, BOOTP, RARP
Means
The status of the initialization record. This example
shows the primary record enabled, but an initialization
record can be enabled or disabled.
The IP address of the host where the access server
receives its software load image through DTFTP.
The IP address of a gateway, if the access server
requires a gateway to reach the Internet load host
through DTFTP.
The name and path of the software load image on the
Internet host, that the access server loads through
DTFTP.
The CARD/XMOP/MOP software load image file name.
The protocols that the initialization record can use to
obtain the software load image.
The protocols that the initialization record can use to
transmit a memory dump file.
The protocols that the initialization record can use to
obtain the parameter file.
0038