NBase-Xyplex MAXserver 1608A Getting Started page 93

The following table lists the factory-default protocol settings:
Software Load Image
CARD
XMOP
MOP
BOOTP
RARP
DTFTP*
*Not enabled by default.
Software Load Images
The following load image protocols are enabled at the factory.
·
CARD indicates the flash card
·
XMOP indicates another Xyplex loader
·
MOP indicates a VAX/VMS host
·
RARP, BOOTP and DTFTP indicate UNIX hosts.
Each initialization record has several loading and dumping protocols
enabled by default if the access server attempts to obtain software and
parameters from the network.
Enabling/Disabling Image Loading Protocols
The unit displays the following prompt:
Enable ALL methods for image loading (Y,N) [N]?
0038
Getting Started with MAXserver Access Servers
Table 6 - Default Protocols
Parameter File
NVS
XMOP
MOP
BOOTP
RARP
Dump file
XMOP
MOP
BOOTP
RARP
93