Changing The Software Image Filename - NBase-Xyplex MAXserver 1608A Getting Started

Use the following command to load the image file:
DEFINE SERVER LOAD [PRIMARY] SOFTWARE "FILENAME"
Example
This example specifies XPCSRV20 as the filename for the secondary
initialization record.
XYPLEX>> DEFINE SERVER LOAD SECONDARY SOFTWARE XPCSRV20

Changing the Software Image Filename

The software load image filename appears in the Software field on the
Loaddump characteristics display (see Figure 33). The default filename for
all MAXservers is XPCSRV20. The filenames apply to primary, secondary,
and tertiary initialization records.
Use the following command to specify a name for the software load image
file:
DEFINE SERVER LOAD [ RECORD |ALL] SOFTWARE FILENAME
record
filename
Example
This example specifies the software load image filename for the
primary initialization record:
XYPLEX>> DEFINE SERVER LOAD PRIMARY SOFTWARE XPCSRV20
52
Getting Started with MAXserver Access Servers
[SECONDARY]
[TERTIARY]
The primary, secondary, or tertiary initialization
record.
The software load image filename.
0038