NBase-Xyplex MAXserver 1608A Getting Started page 44

NBase-Xyplex recommends that you change the default password to restrict
access to the commands that:
·
Change the server's settings
·
Affect other users' ports
·
Affect access to destinations on the network
You might want to change the privilege password periodically, to limit the
number of users who can set privileged mode.
Use the following command to define the privilege password:
DEFINE SERVER PRIVILEGE PASSWORD "password"
The password you define with this command is what users must type in
order to use privileged server commands. The password can be between 1
and 16 characters. Enclose the password string in quotes. The default
password is SYSTEM. There can be only one privileged password per
server.
If you do not type the password on the command line, the system will
prompt you for a password. In this case, do not enclose the password in
quotation mark characters.
Example
Xyplex>> DEFINE SERVER PRIVILEGE PASSWORD "manager"
44
Getting Started with MAXserver Access Servers
0038