Figure 43 - Removing Simms - NBase-Xyplex MAXserver 1608A Getting Started

2. To remove the SIMMs from the sockets, pull the retainers that hold the
SIMM outward (see Figure 43).
1
3. Pull the SIMM toward you, then up. (Basically, you reverse the steps
shown in Figure 37.)
4. Replace the MAXserver cover, and secure it with the four screws you
removed previously.
5. Return the unit to the rack or flat surface from which you removed it,
and plug it back in.
154
Getting Started with MAXserver Access Servers
Pull retainers outward.

Figure 43 - Removing SIMMs

30
0038