Figure 9 - Monitor Parameter Server Display - NBase-Xyplex MAXserver 1608A Getting Started

Access servers

Table of Contents

The following screen displays:

Xyplex>> MONITOR PARAMETER SERVER

MX1620 V6.0.4S18 Rom 470000 HW 00.00.00 Lat Protocol V5.2 Uptime: 13 18:11:56

Address:

88-00-87-23-33-6B

Check Timer:

Retransmit Timer:

Retransmit Limit:

Path:

Last Update Version:

Last Update Date:

Last Update Time:

Name

Local MemCard

Local NVS

The storage process is completed when the "Status" column on this display

says "Current" for all parameter servers, and the "Storage State" field says

"Idle." When these conditions are met, you can turn the unit off.You can

reset the MAXserver to force it to run a self test or to re-initialize the unit.

Before resetting the server, check the port lights to make sure that no

connections are in progress. All connections are terminated when the server

is reset.

To reset the MAXserver, follow these steps:

1. Make a simple "tool" from an ordinary paper clip by bending one end

outward. You need this tool to press the RESET button located behind

the MAXserver front panel.

2. Look for the small hole between the CONSOLE light and the light

labeled '1' (see Figure 10).

Getting Started with MAXserver Access Servers

Name:

X03346B

102C5

07 Dec 1998

16:12:53

Address

Version Date

88-00-87-23-33-6B

102C5 07 Dec 1998 16:12 Current

88-00-87-23-33-6B

102C5 07 Dec 1998 16:12 Current