NBase-Xyplex MAXserver 1608A Getting Started page 115

Example
The following example shows the command that specifies an IP address for
an Internet load host in the primary initialization record:
DEFINE SERVER LOAD PRIMARY IP HOST 140.179.119.3
Access Server IP Address
The Internet load address specifies the Internet address for the access
server. The Internet load host on the network uses this address during
DTFTP loading. The default is 0.0.0.0.
Use the following command to define the the access server IP address:
DEFINE SERVER LOAD [ record |ALL]IP[LOAD]GATEWAY[ ip-address]
Example
The following command example specifies the Internet address for the
primary initialization record:
XYPLEX>> DEFINE SERVER LOAD PRIMARY INTERNET ADDRESS
140.180.118.2
Internet Load File
The Internet Load File field specifies the pathname and filename of the
software load image on the Internet Load Host. The access server searches
for this filename when it uses the DTFTP protocol to obtain the software
load image during initialization. Use the following command to specify the
Internet Load File:
DEFINE SERVER LOAD [ record ] IP [LOAD] FILE "/ pathname / filename "
0038
Getting Started with MAXserver Access Servers
115