Communication Via Profinet - Siemens SINAMICS G110M Function Manual

3.6

Communication via PROFINET

You can either integrate the inverter in a PROFINET network or communicate with the
inverter via Ethernet.
The inverter in PROFINET IO operation
Figure 3-20
The inverter supports the following functions:
● RT
● IRT: The inverter forwards the clock synchronism, but does not support clock
synchronism.
● MRP: Media redundancy, impulsed with 200 ms. Requirement: Ring topology
● MRPD: Media redundancy, bumpless. Requirement: IRT and the ring topology created in
the control
● Diagnostic alarms in accordance with the error classes specified in the PROFIdrive
profile.
● Device replacement without removable data storage medium
● Shared Device for Control Units with fail-safe functions
The inverter as Ethernet node
Figure 3-21
Fieldbuses
Function Manual, 04/2018, FW V4.7 SP10, A5E34229197B AE
The inverter in PROFINET IO operation
The inverter as Ethernet node
Communication via PROFIBUS and PROFINET
3.6 Communication via PROFINET
59