Fig. 19 Linking Of Target System And Twinsafe Terminal; Fig. 20 Starting The Automatic Import From The I/O Configuration - Beckhoff TwinSAFE EL6910 Operation Manual

Operation
Fig. 19: Linking of target system and TwinSAFE terminal
4.4.6.4 Alias devices
The communication between the safety logic and the I/O level is realized via an alias level. At this alias level
(subnode Alias Devices) corresponding alias devices are created for all safe inputs and outputs, and also for
standard signal types. For the safe inputs and outputs, this can be done automatically via the I/O
configuration.
The connection- and device-specific parameters are set via the alias devices.
Fig. 20: Starting the automatic import from the I/O configuration
If the automatic import is started from the I/O configuration, a selection dialog opens, in which the individual
terminals to be imported can be selected.
EL6910 Version: 1.8.0 37