Operation
4.4.6.5
Parameterization of the alias device
The settings can be opened by double-clicking on the Alias Device in the safety project structure.
Fig. 23: Alias Device in the safety project structure
The Linking tab contains the FSoE address, the checkbox for setting as External Device and the link to the
physical I/O device. If an ADS online connection to the physical I/O device exists, the DIP switch setting is
displayed. Re-reading of the setting can be started via the button
. The links to the EL6910/EJ6910
process image are displayed under Full Name (input) and Full Name (output).
Fig. 24: Links to EL6910/EJ6910 process image
The Connection tab shows the connection-specific parameters.
Fig. 25: Connection-specific parameters
EL6910
Version: 1.8.0
39