Downloading The Safety Application - Beckhoff TwinSAFE EL6910 Operation Manual

4.4.7

Downloading the safety application

Before downloading the safety project to the EL6910/EJ6910 or a logic component, the project should first
be checked for validity. If the hardware is complete, the hardware level
checking can take place at the project level
the logic component. If the check returns no errors, the project download
Use only qualified tools
Only use a qualified tool (see note on system limits) for loading, verifying and enabling the project on the
EL6910/EJ6910 or the logic component!
User name and password are case-sensitive
Pay attention to upper/lower case characters for the user name and password.
The standard user is Administrator, the standard password is TwinSAFE.
Power supply during download
Make sure that the TwinSAFE Logic is not switched off during the download. This can lead to unexpected
behavior or permanently disable the TwinSAFE Logic.
Execution of the safety application
During a login or download of a safety application, the execution of the current project is stopped on the
TwinSAFE Logic.
Fig. 65: Download Project Data – The Login dialog
In the Download Project Data dialog specify the user name, the serial number of the EL6910/EJ6910 or the
logic component onto which the project is to be loaded, and the user password. The default user name is
Administrator, the default-password is TwinSAFE. Use the Next button to move to the next dialog.
EL6910
, if online access is only available for the EL6910/EJ6910 or
CAUTION
NOTE
WARNING
Version: 1.8.0
Operation
can be used for checking, or
can continue.
63