4.4.6
Creating a safety project in TwinCAT 3
Further documentation
Information on TwinSAFE function blocks, groups and connections can be found in the TwinSAFE
Logic FB documentation on the Beckhoff website under
http://www.beckhoff.com/english/download/twinsafe.htm.
4.4.6.1
Add new item
In TwinCAT 3 a new project can be created via Add New Item... in the context menu of the Safety node.
Fig. 15: Creating a safety project - Add New Item
The project name and the directory can be freely selected.
Fig. 16: Creating a safety project - project name and directory
4.4.6.2
TwinCAT Safety Project Wizard
In the TwinCAT Safety Project wizard you can then select the target system, the programming language, the
author and the internal project name. Select the setting Hardware Safety PLC as the target system and the
graphical editor as the programming language. The author and the internal project name can be freely
selected by the user.
EL6910
Version: 1.8.0
Operation
35