Operation
Disassembly
Fig. 6: Removal from mounting rail
Each terminal is secured by a lock on the mounting rail, which must be released for disassembly:
1. Pull down the terminal at its orange-colored straps from the mounting rail by approx. 1 cm. The rail
locking of this terminal is automatically released, and you can now pull the terminal out of the Bus Ter-
minal block with little effort.
2. To do this, grasp the unlocked terminal simultaneously at the top and bottom of the housing surfaces
with your thumb and index finger and pull it out of the Bus Terminal block.
22
Version: 1.8.0
EL6910