Info Data For The Twinsafe Group - Beckhoff TwinSAFE EL6910 Operation Manual

Operation
4.5.3

Info data for the TwinSAFE group

For TwinSAFE groups, info data can be enabled via the properties of the TwinSAFE group.
Fig. 118: Enabling the info data in the properties of the TwinSAFE group
The info data are shown in the I/O tree structure below the I/O device in the process image. From here,
these signals can be linked with PLC variables. Further information on the included data can be found in the
documentation for TwinCAT function blocks for TwinSAFE logic terminals.
Fig. 119: Info data for the TwinSAFE group in the tree structure
92 Version: 1.8.0 EL6910