Fig. 140 Creating A Custom Profisafe Connection; Fig. 141 Process Image - Beckhoff TwinSAFE EL6910 Operation Manual

Operation
Fig. 140: Creating a Custom PROFIsafe connection
After opening the alias device, the process image size of the connection can be set via the Process Image
tab. The individual signals can be renamed, so that this text is displayed within the logic.
Fig. 141: Process image
Set the safe address on the Linking tab. Under Full Name (input) and Full Name (output) it contains
information on which process data have to be linked with the corresponding signals of the PROFIsafe
control. The entry Safe Address must be used as F_Dest_Add on the master side.
104 Version: 1.8.0 EL6910