KEB Combivert F5 Instruction Manual page 26

Parameter Description
Lb.18 Brake resistance value
Value range
0,5...300,0 Ω
Lb.19 Safety-gear release
Value range
0...1
GB - 26
Setting Description
30,0 Ω Input of the actually used brake resistance value. With it the inverter calculates the
refed energy and outputs the result in parameter LI.23. It serves as decision support
on whether the employment of a feedback unit would be worth it.
Setting Description
0 The next drive is executed with hard ramps if value 1 is adjusted, in order to pull the
car out of the safety gear.