KEB Combivert F5 Instruction Manual page 55

Parameter description
LI.51 AN1 Display after amplification
Value range
0...±400 %
LI.52 AN2 Display before amplification
Value range
0...±100 %
LI.53 AN2 Display after amplification
Value range
0...±400 %
Description
The parameter shows the value of the analog signal AN1 after running through the
characteristic amplification in percent. The value range is limited to ±400 %.
Description
The parameter shows the value of the analog signal AN2 before the characteristic
amplification in percent. Depending on the setpoint setting the displayed value of
0...±100 % corresponds to 0...±10 V, 0...±20 mA or 4...20 mA.
Description
The parameter shows the value of the analog signal AN2 after running through the
characteristic amplification in percent. The value range is limited to ±400 %.
GB -55