KEB Combivert F5 Instruction Manual page 39

Parameter Description
LF.22 VN Nominal speed
Value range
0,000 m/s...LF.01
LF.23 VI Inspection speed
Value range
0,000...0,630 m/s
LF.24 V 1 intermediate speed 1
Value range
0,000 m/s...LF.01
LF.25 V2 intermediate speed 2
Value range
0,000 m/s...LF.01
LF.26 V3 intermediate speed 3
Value range
0,000 m/s...LF.01
LF.27 VU Evacuation speed
Value range
0,000 m/s...LF.01
LF.28 Setpoint value debounce time
Value range
0...127 ms
LF.30 Starting jerk
Important for the well-being of passengers in a lift is the so-called jerk or shock, that always occurs during acce-
leration processes. This phenomenon even causes objects on conveyor system to topple or fall and puts a heavy
strain on mechanical components. People perceive the jerk differently, depending on age, physical and mental
constitution and whether the movement was anticipated or not.
Value range
0,10...9,99 m/s³
LF.31 Acceleration
Value range
0,10...2,00 m/s²
LF.32 Jerk at end of acceleration
Value range
0,10...9,99 m/s³
Setting Description
0,000
Setting Description
0,000 m/s • it cannot be accelerated from the inspection speed
Setting Description
0,000 m/s • when Lb.05 = 2 or 6, only active if Lb.13 = 1
Setting Description
0,000 m/s • not active at Lb.05 = 2 or 6
Setting Description
0,000 m/s • not active at Lb.05 = 2 or 6
Setting Description
0,000 m/s • off, if no input is assigned with the function „UPS-operation"
Setting Description
0 ms
Setting Description
0,50 m/s³ Experience values:
ment houses
Setting Description
0,90 m/s² Experience values:
ment houses
Setting Description
1,00 m/s³ If the jerk at the end of acceleration is adjusted too low, the parameter „dece-
leration" LF.34 is overridden.
0,5...0,8 m/s³ for nursing homes, hospitals, apart-
0,8...1,2 m/s³ for office buildings, banks etc.
0,5...0,8 m/s² for nursing homes, hospitals, apart-
0,8...1,2 m/s² for office buildings, banks etc.
GB - 39