KEB Combivert F5 Instruction Manual page 34

Parameter Description
LC.24 Operation mode output
If one of the encoder channels is used as encoder output, the output increments per revolution can be adapted to
the requirements of the control card.
Input
0
1
5
9
13
LC.27 Filter time Encoder 2
Value range
0...5
LC.30 Encoder 1 Type
Display
0
2
7
34
39
64
LC.31 Encoder 1 read/write data
Input
0...14
LC.32 Encoder 1 SSI data code
Input
0
1
LC.33 Encoder 1 SSI singleturn resolution
Input
0...13 Bit
LC.40 SSI Multiturn-resolution
Input
0...13 Bit
GB - 34
Setting Description
x off
256 Incr.
1024 Incr.
2048 Incr.
4096 Incr.
Setting Description
3 Serves for the smoothing of faulty speed signals.
0 = 0,5 ms
Description
no encoder identified
SCS 60/70
SCM 60/70
SRS 50/60
SRM 50/60
undefined type
Setting Description
0 In case of „E.EncC" together with EnDat- or Hiperface encoders: set
Lb.01 = 2206 + ENTER
EC.38 = 2 + ENTER
Ud.01 = 11 + ENTER
Setting Description
x Binary-coded
Graycode
Setting Description
10 Bit This parameter adjusts the number of bits of the SSI data word to the con-
nected encoder. The resolution of the digital singleturn absolute position is
determined by the number of bits.
Setting Description
12 Bit Number of Bits for the multiturn-resolution, if a SSI multiturn-absolute valure
encoder is connected.
1 = 1 ms 2 = 2 ms 3 = 4 ms 4 = 8 ms 5 = 16 ms