Masimo Root Operator's Manual page 74

Root NIBPT
Option
Save as
Pediatric
Save as Neo
Factory Defaults Options are restored to
*Changes to USB Ports baud rate will take effect after Root is power cycled, turned off then on
again.
Note: Restore Factory Defaults can only be performed during non-monitoring and no cable
connections are present.
Device Output
The Device Output screen allows the user to configure additional data output options. A Nurse
Call can be triggered based on alarm, low Signal IQ events or both. In addition, Nurse Call
Polarity can be inverted to accommodate local Nurse Call station requirements.
Option Description
Nurse Call Controls the source of monitoring
Trigger which sets off the trigger.
Controls the mechanism of action for
Nurse Call triggering to occur. Should be changed
Polarity to accommodate institutional Nurse
Call settings.
USB Port 1 Controls the output type for USB Port 1. None
www.masimo.com
Description
Saves current profile
parameter as the Pediatric
Profile.
Saves current profile
parameter as the Neonatal
Profile.
factory value.
72
Chapter 3: Operation
Factory Configurable
Default Settings
Setting
Press Save to
N/A
update the profile.
Press Save to
N/A
update the profile.
Press Restore.
N/A
Factory Configurable
Default Settings
Setting
Alarms, Low SIQ,
Alarms
Alarms + SIQ
Normal Normal or Inverted
None, SatShare,
ASCII 1,
IntelliBridge, or IAP
Masimo