Masimo Root Operator's Manual page 73

Root NIBPT
Option
Standby
Enabled
Standby
Reminder Tone
Interval
Allow Unsigned
Upgrade
Sessions
Enabled
USB Port 1*
baud rate
USB Port 2*
baud rate
Data Collection
Enabled
EDF Collection
Enabled
Synchronized
Waveforms
Enabled
Presence
Monitoring
Save as Adult
www.masimo.com
Description
Enables or disables option
for Standby Mode. See
Standby Mode on page 80.
Allows for time interval of
30 sec, 1 min, 2 min, 3 min,
5 min, 10 min, or 15 min, as
well as Off.
Allows for Root software to
be reverted back to older
version
Enables or disables Session
Management. See Session
Management on page 82
Enables option to change
baud rate of device
Enables option to change
baud rate of device
Enables or disables physical
data collection mode.
Enables or disables EDF
data collection from
SedLine (See Operator's
Manual for SedLine)
Enables or disables
Synchronization Waveform
view.
Enables or disables
Presence Monitoring
Saves current profile
parameter as the Adult
Profile.
71
Chapter 3: Operation
Factory Configurable
Default Settings
Setting
Off On or Off
30 sec, 1 min, 2 min,
30 sec 3 min, 5 min, 10
min, 15 min, or Off
Off On or Off
Off On or Off
9600, 19200,
38400, 57600,
921600
115200, 230400, or
921600
9600, 19200,
38400, 57600,
921600
115200, 230400, or
921600
Off On or Off
Off On or Off
Off On or Off
Off On or Off
Press Save to
N/A
update the profile.
Masimo