Chapter 2: Setting Up; Unpacking And Inspection; Guidelines For Setting Up - Masimo Root Operator's Manual

Chapter 2: Setting Up

Unpacking and Inspection

To unpack and inspect Root
1. Remove Root from the shipping carton and examine it for signs of shipping
damage or exposed electronics.
2. Confirm that you have all components for the Root by checking all materials
against the packing list:
•
Root
•
AC power cord
Note: Save all packing materials, invoice and bill of lading. These may be required
to process a claim with the carrier.
If anything is missing or damaged, contact Masimo's Technical Service Department. See
Return Procedure on page 160.

Guidelines for Setting Up

Root has a built-in bracket interface that allows it to be mounted on a pole or roll stand.
When setting up Root, follow these guidelines:
•
Place on a stable, hard, flat, and dry surface near the patient.
•
Maintain a minimum of three (3) centimeters (one [1] inch) of free space around
Root.
•
Ensure that the back panel speaker is not covered to avoid a muffled alarm sound.
•
Charge Root's battery fully before use. See Initial Battery Charging on page 27.
Root should not be operated outside the environmental conditions listed in the
specifications section. See Environmental on page 136.
www.masimo.com 25 Masimo