Description Of Menu 10 Functions - Ikegami HLM-2450WB Operation Manual

⑤ Executing the automatic adjustment of PC input
(Only for the DVI(PC) and CM-175)
・Used to automatically adjust the phase, clock and
horizontal/vertical onscreen position in Items ⑥
thru ⑨.
・ With the "EXECUTE" characters blinking, press
the ENT switch, and the automatic adjustment
will be made.
* During the automatic adjustment, do not turn off
the power and switch the input signal.
⑥ Adjusting the horizontal onscreen position with
PC input (Only for the DVI(PC) and CM-175)
・Used to adjust the horizontal onscreen position.
4-13．Description of MENU 10 Functions
ＭＥＮＵ１０（ＲＥＳＥＴ）
１．ＬＯＡＤ ＦＡＣＴＯＲＹ
２．ＲＥＳＥＴ ＦＩＬＥ
ＳＥＴ→ ＥＸＩＴ→
E S C
ＥＮＴ
① Executing the initialization of set data
・Perform this setting to restore the default
settings.
： Factory settings are restored
・ALL
for all PRESET data, all
MENUs and switches.
： Factory settings are restored
・PRESET
for all PRESET data.
・MENU&SW ： Factory settings are restored
for all MENUs and switches.
・To initialize, select an item to be initialized with
the and switches and press the ENT
switch. The confirmation message appears.
Press the ENT switch again. To cancel the
initialization, just press the ESC switch.
* The initialization of data cannot be executed if
"DATA LOCK" or "ALL LOCK" is set in "5-2.
⑥ Setting of data protection password".
To initialize the data,unlock.
① Executing the initialization of set data
ＡＬＬ
② Selecting the preset files to be initialized
ＡＬＬ
⑦ Adjusting the vertical onscreen position with PC
input (Only for the DVI(PC) and CM-175)
・Used to adjust the vertical onscreen position.
⑧ Adjusting the clock with analog PC input
(Settings only for the CM-175)
・Used to adjust if noticeable vertical stripes
appear onscreen.
⑨ Adjusting the phase with analog PC input
(Settings only for the CM-175)
・Used to adjust if horizontal stripes appear or the
characters look blurry onscreen.
② Selecting the preset files to be initialized
・ When "PRESET " is selected in ① , select a file
for restoring the set data to the factory-set one.
： All the preset files are
・ALL
： FILEx only is initialized.
・FILEx
(x:1 to 8)
・FILE1-8 ： FILE1 to FILE8 only are
： REF D65 only is initialized.
・D65
： REF D93 only is initialized.
・D93
・D65/D93 ： REF D65 and D93 only are
- -
32
initialized.
initialized.
initialized.