Table 15. Expansion card slots supported on the system board
PCIe slot
Slot 1 (Gen3)
Slot 2 (Gen3)
Slot 3 (Gen3)
Slot 4 (Gen3)
NOTE:
The expansion cards are not hot swappable.
Memory specifications
The Dell EMC PowerEdge T340 system supports the following memory specifications for optimized operation:
Table 16. Memory specifications
DIMM type
UDIMM
Storage controller specifications
The Dell EMC PowerEdge T340 system supports the following controller cards:
Table 17. Dell EMC PowerEdge T340 system controller cards
Internal controllers
•
PERC H730P
•
PERC H330
•
S140
•
HBA330
Drive specifications
Drives
The Dell EMC PowerEdge T340 system supports:
•
4 x 3.5-inch SAS, SATA drives, 2.5-inch hotplug drives
•
8 x 3.5-inch SAS, SATA drives, 2.5-inch hotplug drives
NOTE:
2.5-inch drives in 3.5-inch carriers are supported for SAS, and SATA SSD drives.
120
Technical specifications
Processor Connection
Processor
Processor
Platform Controller Hub
Platform Controller Hub
DIMM rank
Single rank
Dual rank
PCIe slot height
Full Height
Full Height
Full Height
Full Height
DIMM capacity
8 GB
16 GB
8 GB
16 GB
External controllers
•
12Gbps SAS Ext. HBA
PCIe slot length
Half Length
Half Length
Half Length
Half Length
Minimum RAM
8 GB
16 GB
8 GB
16 GB
Slot width
x8 link in x8 slot
x8 link in x16 slot
x1
x4 link in x8 slot
Maximum RAM
32 GB
64 GB
32 GB
64 GB