Silvercrest SMUD 860 A1 Operating Instructions Manual page 35

–
–
–
–
–
■ To clean the steam vent
–
–
SMUD 860 A1
Clean the silver panel with the sealing ring in warm water with a little
detergent, then rinse it with clear water.
Wipe the inside of the appliance lid
sary, use a little detergent on the cloth. Afterwards, wipe with a cloth
moistened only with clear water to ensure that no detergent remains on
the appliance.
Dry everything properly.
In order to insert the silver panel with the sealing ring, first insert the up-
per brackets (2) into the indentations in the appliance lid
Then push both locking mechanisms (1) into the appliance lid
they click into place.
, you can disassemble it:
Pull the steam vent
down:
Turn the flat lid of the steam vent
the flat lid is pointing at the opened lock:
with a damp cloth. If neces-
out of the appliance lid
anticlockwise so that the arrow on
.
until
and turn it upside
│ 31 ■
GB