Tightening Torques - ABB REACT-3.6-TL Product Manual

T
ightening torques
To maintain the IP65 protection of the system and for optimal installation,
the following tightening torques must be used:
REACT-UNO
AC cable gland
AC back-up cable gland
Service cable glands
OUT-4 (M20)
Screws for plastic cover for inverter unit
Screws for cover in connections area
AC output terminal block screws
AC output (back-up) terminal block screws
Communication and control terminal block screws
1.5 mm
Multifunctional relay terminal block screws
IP65 cover fastening ring nut for installation on single
REACT-UNO
REACT-BATT-AP1
Ground connection point screws
Plastic cover screws
Screws for cover in connections area
REACT-MTR-1PH
Communication signal terminal block screws
Power supply terminal block screws
REACT-MTR-3PH
RS485 serial terminal block screws
Three-phase connection terminal block screws
Скачано с сайта интернет магазина https://axiomplus.com.ua/
called AC GRID
48
called AC-1
49
51
called OUT-1, OUT-2, OUT-3,
2 Max
11
- 25 -
2 - Characteristics
(M25)
(M25)
10
09
- 16 mm 2 Max
25
24 - 4 mm 2 Max
21
22 1.5 mm 2 Max
35
09
57 2
1.5 mm Max
56 2
4 mm Max
60 2
- 1 mm Max
Max 4.0 Nm
59 2
- 25 mm
7.5 Nm
7.5 Nm
7.0 Nm
2.0 Nm
1.2 Nm
1.5 Nm
0.6 Nm
0.25 Nm
10Nm
2.0 Nm
2.0 Nm
1.2 Nm
0.5 Nm
0.5 Nm
0.25 Nm